MXR ISO Mini Iso-Brick Pedal Power Supply
On most orders over £149!
Free shipping is for UK mainland only & excludes Highlands & Islands.
Oversized items excluded.
(See full terms & conditions)
About DeliveryTHE MXR Mini Iso-Brick is a fantastic space-saving power brick that supplies noise-free DC power to your pedals. This ridiculously tiny unit will take up next-to-no space on your board.
The Mini Iso-Brick Power Supply has five outputs, fully isolated to eliminate any ground loop noise. Four of the outputs supply 9 volts of power at 300mA, while a fifth can be set to provide either 9 volts or 18 volts at 800mA depending on your needs. With a generous amount of current on tap and the ability to handle both negative and positive grounds, these outputs will accommodate almost any pedal, analog or digital.
Five outputs not enough? If you need to add an extra pedal, the Mini Iso-Brick Power Supply also comes with a handy splitter cable that can be used to connect two pedals to a single output ( provided they require the same voltage and you don’t exceed the current output rating). If you went ahead and purchased an additional four splitter cables, you have the potential to power up to ten pedals.
The Mini Iso-Brick Power Supply comes equipped with LEDs to indicate that your connections are solid. It may be ultra-small but the Mini Iso-Brick is one tough cookie - strong, durable, reliable and consistent. It wont let you down.
FEATURES:
- Input 18V:
- At 2 Amps regulated supply (positive barrel negative center 5.5mm x 2.1mm plug)
- Outputs:
- 9-18V @ 800mA (switched)
- (4) 9V @ 300 mA
- (All positive barrel negative center 5.5mm x 2.1mm)
Brand | MXR |
---|---|
Specification |
|
On most orders over £149!
Free shipping is for UK mainland only & excludes Highlands & Islands.
Oversized items excluded.
(See full terms & conditions)
About Delivery